Polaris Slingshot shifter conversion adapter
1320 Performance

Polaris Slingshot shifter conversion adapter

$35.00 In Stock Contact us for availability
CODE: SS-shifter-apt
  • Description
  • Shipping and Refund
  • Reviews

1320 Performance Polaris Slingshot shifter adapter 7075 Aluminum/304 Stainless


When we first start modifying the Polaris Slingshot we notice the factory shifter does not have any thread and it's got a funky side screw type shift knob that is ugly and it's gotta go after we try over 30 shift knobs and barely can find on to fit on to the factory shifter we began to think how we can fix this problem, so we took off the factory shifter adapter and machine a whole new piece that will allow you to use any shift knob with a M10x1.5 thread pitch (most honda, acura shift knob thread and the most common aftermarket shift knob thread size). This shift adapter is engineered specifically for the Polaris Slingshot out of high quality 7075 Aluminum not the cheap soft 6061 Aluminum that every one else is using to save cost. The shifter thread is made out of 304 Stainless steel so it won't break during hard gear change. A high quality stainless steel jam nut for the shift knob is included so your shift knob will always face the correct direction.


this is a direct bolt on shifter adapter to allow you easily put on the shift knob of your choice.


what you will receive in this auction:

1x Polaris slingshot shifter adapter (10x1.5 thread size)

1x stainless steel jam nut.


*** shift knobs are not included.


Tool required for installation:

5mm Allen key or socket (use to take off factory shift knob and factory shifter adapter)

small flat head screw driver (remove the silver clip on the shift boot)


Standard shipping is free average delivery time is 3-7 business days.

Priority mail shipping is $3.95 average delivery time is 1-3 business days.



 photo 050_zpszp85gyfr.jpg

 photo 051_zpssuqvc9wt.jpg

 photo 054_zpsqqlnhbnh.jpg

Remove the factory shifter adapter and slide on our shifter adapter tighten the HEX screw on the side
 photo 060_zps5fsfb2hw.jpg

 photo 061_zpsrjgv1qjw.jpg


Pry open the silver clips on the factory shift boot and install the shift boot on to our shifter adapter we machine the groove for a perfect fit.

 photo 062_zpsqf1hjd6o.jpg

 photo 063_zpsfusp0lob.jpg

 photo 064_zpspar7hrgo.jpg

Below are some shift knob install picture to show you what it will look like with our adapter installed.


 photo 065_zpsdfmk3lzk.jpg

 photo 066_zpsbz1iynwj.jpg

 photo 067_zpsfyfuuyis.jpg

 photo 069_zps5thl6jaw.jpg

 photo 071_zpsqzcbgrmq.jpg

 photo 073_zpsm0ni22vd.jpg

 photo 077_zpsdqbdrhjv.jpg

 photo 078_zpsm0aobdc8.jpg

 photo 080_zpsdzum1mtx.jpg

 photo 081_zpsohurdjfq.jpg

Customer Reviews

Based on 1 review Write a review

Recently Viewed